arc carbon
英 [ɑːk ˈkɑːbən]
美 [ɑːrk ˈkɑːrbən]
网络 电弧碳精棒
双语例句
- Arc furnace: Type of electric furnace in which heat is generated by an arc Between carbon electrodes above the surface of the material ( commonly a metal) Being heated.
电弧炉：电炉的一种，其热量由被加热材料（通常为金属）上面的炭质电极间的电弧产生。 - Weld Appearance of CO_2 Laser-Gas Metal Arc Hybrid Welding for Ultra-Low Carbon Bainitic Steel
超低碳贝氏体钢CO2激光-气体金属弧焊复合焊接成形特性 - It can provide several high performance welding modes, such as constant-voltage submerged arc welding, constant-current submerged arc welding, gas shielded welding and carbon arc air gouging.
它能提供多种高性能的焊接模式，如恒压埋弧焊、恒流埋弧焊、气保焊、碳弧气刨。 - For straight seams, we use submerged arc welding or carbon dioxide welding; for some corners and small areas, we still use manual welding.
对于长直接板缝，我们用埋弧焊或二氧化碳气体保护焊；拐角处和小地方，还用手工焊。 - Effects of Arc Discharge on Friction and Wear Properties of Metal-impregnated Carbon Strip Sliding against Cu Trolley under Electric Current
电弧能量对浸金属碳滑板材料载流摩擦磨损性能的影响 - Multi-function include manual arc welding, argon arc welding, carbon arc welding.
功能多，可用于手弧焊、氢弧焊、碳弧气刨。 - The films prepared by pulse arc ion plating had typical diamond-like characteristics and were tetrahedral amorphous carbon films.
结果表明：所制备的类金刚石碳薄膜为四面体非晶碳薄膜，具有典型的类金刚石结构特征； - The hot-dip aluminium and the micro arc oxidation on surface of carbon steel were researched.
进行了碳钢热浸镀铝后微弧氧化的试验研究。 - A novel fabrication process of carbon nanotubes cathode emitters is presented in the work. Single-walled carbon nanotubes ( SWNTs) with high purity have been synthesized by dc arc discharge evaporation of a carbon electrode including Ni and Y_2O_3 catalysts in H_2-He mixture gas.
采用Y2O3和Ni作催化剂，在H2和He混合气体气氛下通过弧光放电法得到高纯度的单壁碳纳米管。 - Study on composite deposite technology of arc air gouging carbon
碳弧气刨炭棒复合镀层工艺的研究 - Arc Voltage Self-optimizing Intelligent Control System for Carbon Dioxide Half Short-circuiting Transfer Welding
CO2半短路过渡焊电弧电压自寻优智能控制 - Analysis on the welding arc physical characteristic of Marble-Fluor carbon steel electrode
大理石-萤石型碳钢焊条电弧物理特性分析 - According to the differences in reducibility of major elements in ocean polymetallic nodules, selective reduction smelting of the nodules is conducted in a DC arc furnace using carbon as reductant, obtaining acceptable Mn enriched slag and smelted alloy.
根据大洋多金属结核中各主要元素的还原性差异，用碳作还原剂，在直流电弧炉中选择性还原熔炼大洋多金属结核，获得了合格的富锰渣产品和熔炼合金。 - Arc Voltage Intelligent Controller of Carbon Dioxide Arc Welding Based on Evaluation of Short-Circuiting Transfer Process
二氧化碳焊接弧压智能控制器 - Intelligent Control of Optimized Matching of Welding Arc Voltage and Current for Carbon Dioxide Short-Circuit Metel Transfer Welding
CO2短路过渡焊电压和电流最优匹配的智能控制 - Metal argon arc welding of red copper and low carbon steel
紫铜与低碳钢的熔化极氩弧焊 - The physical and chemical properties of welding arc affecting the amount and toxicity of fumes generated during manual arc welding with low carbon steel basic electrodes are investigated.
本文研究了影响碳钢碱性焊条焊接烟尘量及其毒性的电弧物理及化学因素。 - A Study on The Sintered Flux with High Cryogenic Toughness Used for Submerged ARC Welding in Shipbuilding Carbon Steel
船用碳钢埋弧焊用高韧性烧结焊剂的研究 - The chemical composition, mechanic property, weldability and corrosion resistance of argon arc welding wire for low carbon steel pipe line are contrasted and analyzed.
对低碳钢管线用的氩弧焊丝的化学成分、机械性能、可焊性能、耐腐蚀性能进行对比分析，为合理选用焊丝提供了依据。 - The accumulated solar UV data, solar UV-spectrum in Guangzhou area, and UV-spectrum of artificial lamp as sunshine carbon arc, UV carbon arc, xenon arc etc were analyzed.
系统分析了太阳近紫外能量累积值与紫外能谱实测结果及实测阳光碳弧、紫外碳弧、氙灯等人工光源紫外能谱分布图； - And it also brings forward the security protection of noise, arc and dust in process of carbon arc air gouging.
并提出了碳弧气刨过程对噪声、弧光以及粉尘的安全防护。 - Process of Electric Arc Furnace for Producing Wire of Quality High Carbon Steel
电弧炉冶炼优质硬线钢的生产工艺 - Plasma-gas metal arc welding procedure on low carbon steel
低碳钢熔化极等离子弧焊接工艺 - By the technology of vacuum cathodic arc deposition, graphite as cathode, Diamond like carbon film ( DLC) was deposited on PMMA resin denture.
采用电弧离子镀膜方法，以高纯石墨为碳离子源在PMMA树脂义齿表面沉积类金刚石膜。 - The microstructure and mechanical properties of welding joints were studied by manual metal arc welding, carbon dioxide arc welding and plasma arc welding.
采用手工电弧焊、二氧化碳气体保护焊、等离子弧焊焊接400MPa级超级钢，并对焊接接头显微组织及力学性能作了分析研究。 - The object of this thesis are two kind of different materials which was smelted by ZG-0.01 vacuum medium frequency induction furnace and WS-4 non-consumable vacuum arc furnace with pure iron, pure chromium, carbon, rare earth element ( cerium) as raw materials.
本论文研究是以纯铁、纯铬、碳、稀土元素铈为原料，通过ZG-0.01真空中频感应炉和WS-4非自耗真空电弧炉分别冶炼了两种Ce含量不同的1Cr17Ce不锈钢试样。 - The results of TEM characterization show that the carbon films formed on stainless steel, quartz and Si ( 100) substrates, which were put above, at one side of, and under the arc discharge region, mainly consist of carbon nanoparticles or carbon particles.
TEM表征结果表明，放置于电弧放电区域上面、侧面和下面的不锈钢、石英和硅（100）基底上生成的膜状碳产物均主要由碳纳米颗粒或碳颗粒构成。